The warning lamp 
lights up when the parking brake is applied.
lights up when the parking brake is applied.If the warning lamp flashes, insufficient braking force has been applied or released. Move the selector lever to position P as an additional safeguard. Make sure that the warning lamp has gone out before you drive off.
flashes, insufficient braking force has been applied or released. Move the selector lever to position P as an additional safeguard. Make sure that the warning lamp has gone out before you drive off.
Parking brake: fault. Please contact workshopThere is a malfunction in the parking brake. Drive to a qualified workshop without delay and have the fault rectified.
Parking brake: caution! Vehicle parked too steepThe braking force applied is insufficient to hold the vehicle. The brakes have overheated. The vehicle can roll away, even on a gentle slope.
Parking brake is appliedIf this message appears, press the brake pedal and then release the parking brake as necessary.
Parking brake: emergency brakingThe emergency braking function has been triggered.
Please release parking brake
If this message appears, release the parking brake.
Please press brake pedal to release parking brake
To release the parking brake, press the brake pedal and simultaneously press the switch (alternatively, use the auto release function link►).
(alternatively, use the auto release function link►).Note
For further information on the parking brake refer to link►.