|
- Fig. 1 Position of the bulbs on the bulb carrier (example for inner left rear light)
Applies to vehicles: with halogen system
The table below gives an overview of the bulb positions.
Bulbs -A- and -B- have a plug-in connection and can be changed simply by pulling out the old bulb and inserting a new one.
Bulb -C- is secured by a bayonet fastener:
Lightly press the defective bulb -C- into the bulb carrier, then turn it anti-clockwise and remove it.
Fit the new bulb -C-, pressing it into the bulb holder and turn it clockwise as far as it will go.
If necessary, use a cloth to remove any fingerprints from the glass part of the bulb -A-/-B-/-C-.
Check whether the new bulb is working.
Re-install the bulb carrier ►Link.
Position of bulbs
| Pos. |
Bulb function |
| A |
Tail light |
| B |
Tail light/rear fog light |
| C |
Reversing light |