- Fig. 1 Instrument cluster: Time, date, trip recorder and overall mileage recorder
- Fig. 2 Instrument cluster: Reset button
Quartz clock/radio-controlled clock*/GPS-controlled clock*
Depending on the equipment fitted, you can use the infotainment system to select a quartz clock, a radio-controlled clock* 
or a GPS-controlled clock* 
. Please refer to the infotainment Operating Manual for more details.
or a GPS-controlled clock* . Please refer to the infotainment Operating Manual for more details.Trip recorder/odometer
The trip recorder -A- Fig. 1 shows the distance that has been driven since it was last reset. It is used to measure individual journeys. The last digit of the trip recorder indicates distances of 100 metres or tenths of a mile.
The trip recorder can be reset to zero by pressing the button 0.0 Fig. 2.
The odometer -B- Fig. 1 records the vehicle's total mileage.
You can switch the display from kilometres to miles and vice versa via the function selector button SETUP on the infotainment system.
Fault display
If there is a fault in the instruments, the letters DEF appear in the trip recorder display. Have the fault rectified as soon as possible.
Note
- The date, time, trip recorder and odometer will be displayed for about 30 seconds after you switch off the ignition or open the driver's door.
- You can also call up the display when the ignition is switched off by pressing the SET button Link.
- The trip recorder is reset automatically after it passes 9,999.9 km (mi).