- Fig. 1 Overview of keypad
Applies to vehicles: with handset for the car telephone kit
The factory-fitted handset is already bonded to the car telephone kit.
You may have to bond the handset to the car telephone kit if the connection is not established automatically. The bonding procedure is started from the handset.
In the Bluetooth settings menu of the MMI system, set Discoverability to on for the bonding process Link.
Press the right control button -3- Fig. 1 to call up the main menu.
Select the main menu Settings using the navigation button -5- Fig. 1 on the handset.
Use the navigation button of the handset to select the menu option Bluetooth and press the control button for Ok.
Select the menu option Veh. base station and press the control button for Ok. The available vehicle base station will be displayed (e.g. "AUDI MMI 2613").
Select the vehicle base station (e.g. "Audi MMI 2613") and press the control button for Conn. on the handset.
To establish the connection, turn the rotary pushbutton of the MMI system to Yes and press the rotary pushbutton. A 16-digit PIN code will appear on the MMI display.
To enter the PIN code displayed, turn the rotary pushbutton of the MMI system to Yes again and press to confirm.
Enter this PIN code on the handset while the vehicle is stationary and press the control button for Ok. You will be given about 30 seconds to complete the entry.
To enter any 16-digit PIN code, turn the rotary pushbutton of the MMI system to No and press the rotary pushbutton. The speller will appear on the MMI display.
Enter any 16-digit PIN code.
Turn the speller to OK and press the rotary pushbutton.
Then enter the same 16-digit PIN code on the handset while the vehicle is stationary and press the control button for Ok. You will be given about 30 seconds to complete the entry.
The exact name of the Bluetooth-capable base station on your vehicle (e.g. "AUDI MMI 2613") can be retrieved using the Bluetooth name function Link.
Note
The handset can be deleted from the list of Bluetooth devices Link.