Audi MMI   Navigation   Navigation  Map display
Map with crosshairs switched off
Fig. 1 Map with crosshairs switched off
Standard map with crosshairs switched on
Fig. 2 Standard map with crosshairs switched on
Applies to vehicles: with navigation system
Calling up the map
Select: Function selector button NAV. The map or the navigation menu that was last activated will appear in the MMI display.
You can switch to the map display from one of the navigation menus by pressing the function selector button NAV again.
Switching the crosshairs on/off
Press the rotary pushbutton. The crosshairs and the map legend menu will be switched on Fig. 2.
To switch off the crosshairs and the map legend menu Fig. 1, press the BACK button.
Crosshairs switched off:
-1- Orientation: The map is displayed either facing north or facing the direction of travel Link.
-2- Scale: Turn the rotary pushbutton clockwise/anti-clockwise to zoom in or out.
-3- Distance to destination/stopover
-4- Calculated time of arrival at destination/stopover
-5- Speed display1)
-6- Altitude display
-7- Location of the vehicle
-8- Display of upcoming turn-off
-9- Display of selected additional map information
Crosshairs switched on:
-10- Display of position coordinates of the crosshairs (longitude/latitude)
-11- Moving along the route: This function can be used while route guidance is activated. Turn the rotary pushbutton clockwise/anti-clockwise to move the map along the current route.
-12- Destination details menu: If available, details on the point selected with the crosshairs are displayed (e.g. address). The point on the map selected with the crosshairs can be set as a destination or stopover, stored in the directory and called up on the telephone Link.
-13- Repetition of the last route guidance cue
-14- Examples of selected map contents
-15- Additional information on the point selected with the crosshairs: If you use the crosshairs to select a point on the map, any existing information on this location (e.g. address, phone number or traffic information) will be displayed.
If the crosshairs are switched on, you can select and set a destination from the map Link.
If you change the map orientation setting -1- and press the rotary pushbutton while the position 2D map type Link and the legend menu are activated, the orientation is changed from dir. of travel to north and vice versa. This setting is stored.
Note
For more information about the traffic map display, please refer to Link.
1) Applies to vehicles without camera-based speed limit display only.

All images, logos and text are property of © Audi. This site has no relationship with the company Volkswagen - Audi Spain nor any of its affiliates worldwide. For more information.