- Fig. 1 Luggage compartment: Tools and jack
The tools are carried under the floor panel in the luggage compartment.
If you need the tools or the jack*, you will have to open the floor panel and take out the spare wheel* Link.
The tool kit includes:
- A hook for removing hub caps*
- Plastic clip for removing wheel bolt caps*
- Pin for mounting a wheel
- Screwdriver with reversible blade
- Tool for removing rear lights in side panel
- Interchangeable bit (Torx bit for changing bulbs)*
- Crank handle for jack
- Adapter for anti-theft wheel bolts*
- Jack*
- Box spanner for wheel bolts
- Towline anchorage
Some of the parts listed are only fitted on certain models or are optional extras.
Before stowing the jack* again, wind down the arm of the jack as far as it will go.
WARNING!
- Do not use the hexagonal socket in the screwdriver handle to tighten the wheel bolts. It is not possible to tighten the bolts with the required torque - risk of accident.
- The jack supplied by the factory is only designed for changing wheels on this model. On no account attempt to use it for lifting other vehicles or loads - risk of injury!
- Never start the engine when the vehicle is on the jack – risk of accident.
- If work has to be done under the vehicle, ensure that it is safely supported on stands designed for the purpose, otherwise there is a risk of injury.