|
- Fig. 1 DVD changer
Applies to vehicles: with DVD changer
The DVD changer is located in the glove box.
- To load a CD/DVD: Press the LOAD button -3- Fig. 1. The DVD changer is not ready for loading as long as the LEDs of the DVD slot light up in red. When the DVD changer is ready for loading, the green LEDs in the DVD slot -2- will flash. Insert the CD/DVD (text facing upwards) into the DVD slot -2-, holding it straight. The CD/DVD will automatically be loaded into the next available position in the DVD changer. The corresponding button -4- will light up.
- To load several CDs/DVDs simultaneously: Press and hold the LOAD button -3- for more than 2 seconds. Wait until the green LEDs in the DVD slot -2- flash. Insert the CDs/DVDs (text facing upwards) one at a time into the DVD slot -2-, holding them straight. The CDs/DVDs will automatically be loaded into the next available positions in the DVD changer.
- To load a CD/DVD in a specific position: Press the LOAD button -3-. The next empty position -4- will flash. The occupied positions will light up permanently. Press the button corresponding to the desired position and remove the CD/DVD if necessary. Insert the CD/DVD that you wish to load (text facing upwards) into the slot -2-, holding it straight.
- To eject the CD/DVD that is currently playing: Briefly press button -1- twice. After it has been ejected, the CD/DVD will automatically be pulled back into the DVD changer after about 30 seconds if it is not removed from the DVD slot.
- To eject any CD/DVD: Press the button -1- and then one of the flashing buttons -4-.
- To eject all CDs: Press and hold button -1-.
- To stop the loading process: Press the LOAD button -3- again while loading all CDs.
You can load up to six CDs/DVDs into the DVD changer. For information on the characteristics of the supported storage media, please refer to ►Link.
The DVD changer is started and operated via the MMI ►Link.
Note
Please observe the notes for handling CDs/DVDs.