- Fig. 1 Luggage compartment: Cover for tool kit
- Fig. 2 Luggage compartment: Tool kit and tyre repair kit
The tools are carried under the floor panel in the luggage compartment.
Hybrid vehicles*: The tool kit and tyre repair kit are located elsewhere Link.
Lift the floor panel by the plastic handle.
Hook the handle onto the luggage compartment seal Fig. 1.
Turn the knob anti-clockwise and remove the cover or the spare wheel*.
Unhook the floor panel before closing the boot lid.
The tool kit includes:
- A hook for removing hub caps
- Plastic clip for removing wheel bolt caps*
- Box spanner for wheel bolts
- Pin for mounting a wheel
- Screwdriver with reversible blade
- Interchangeable bit (Torx bit for changing bulbs)
- Towline anchorage
- Adapter for anti-theft wheel bolts*
- Tyre repair kit* consisting of tyre sealant can and compressor
- Jack*
Some of the parts listed are only fitted on certain models or are optional extras.
Before stowing the jack* again, wind down the arm of the jack as far as it will go.
WARNING!
- Do not use the hexagonal socket in the screwdriver handle to tighten the wheel bolts. It is not possible to tighten the bolts with the required torque - risk of accident.
- The jack supplied by the factory is only designed for changing wheels on this model. On no account attempt to use it for lifting heavier vehicles or other loads - risk of injury.
- Never start the engine when the vehicle is on the jack – risk of accident.
- If work has to be done under the vehicle, ensure that it is safely supported on stands designed for the purpose, otherwise there is a risk of injury.
Note
You must activate the jacking mode* before lifting your car on the jack Link.