Applies to vehicles: with telephone
Requirements
The vehicle must be stationary, and the ignition must be switched on.
The Bluetooth function and the discoverability option of the MMI system ►Link and the mobile phone must be activated.
The MMI and the mobile phone you would like to connect must not be linked actively to any other Bluetooth device.
The MMI must not be connected to a mobile phone.
Connecting a mobile phone
Select: TEL button > Connect mobile phone > Find new devices. The available Bluetooth devices will be shown on the MMI display. Or: Search for the MMI system via the Bluetooth device search function on your mobile phone.
Select and confirm the desired mobile phone from the list of Bluetooth devices shown.
Select and confirm Car phone*1) or Handsfree. The MMI will generate a PIN for the connection Fig. 2.
Select and confirm Yes.
Enter the PIN to establish a connection on your mobile phone. Or: If the PIN is already being displayed on your mobile phone, confirm it on the phone and in the MMI. You have about 30 seconds to enter the PIN.
If you select the Car phone* profile, you must also enter the PIN for your SIM card.
Please note any additional system queries on your mobile phone, e.g. whether the phone should connect automatically in the future. On some mobile phones, you may also need to download the directory separately.
After connecting successfully
The signal strength symbol -9- and the Bluetooth symbol -14- will appear in the status line of the MMI display when the mobile phone has been connected successfully Fig. 3. In addition, the contacts on the mobile phone are automatically loaded into the directory of the MMI. This may take several minutes, depending on how many contacts are stored on the mobile phone.
Note
- Bluetooth devices only have to be bonded once. Any devices that have already been bonded to the MMI system are connected automatically when they are within range and the ignition is on.
- You can speed up the automatic connection by authorising the MMI connection on your mobile phone.
- You receive the SIM PIN code from your mobile network service provider together with the SIM card. If you enter the SIM PIN code incorrectly three times2) in a row, the SIM card will be be blocked. A PUK (personal unblocking key) must be entered in order to reactivate the SIM card.
- You can bond several mobile phones to the MMI system; however only one connection is active at a time.
- Any Bluetooth device that is already connected to the MMI system is disconnected when another device is connected to the system.
- The Bluetooth connection between the system and the mobile phone is automatically terminated when you leave the car.
- For further information regarding your mobile phone, contact your mobile network service provider or refer to the operating instructions for your mobile phone. For information on using a phone in your car, please go online (e.g. www.audi.com/bluetooth) or ask an Audi dealer.
1) Not available in all markets. Applies to mobile phones with Bluetooth remote SIM Access Profile on vehicles with Audi connect* and Audi phone box*.
2) The number of possible attempts depends on the SIM card.