Audi A8   Controls   Heating and cooling  Deluxe automatic air conditioner
We recommend pressing the AUTO button and setting the temperature to 22 °C (72 °F).
The functions can be switched on and off by pressing the buttons. The LED in the corresponding button lights up when the function is switched on. The rotary controls are used to adjust the temperature, blower speed and air distribution*. Separate settings can be selected for the driver's and front passenger's sides.
With the rear cabin controls Fig. 2, you can make adjustments for the entire rear cabin (3-zone deluxe automatic air conditioner*) or you can separately adjust the settings for both sides of the rear cabin (4-zone deluxe automatic air conditioner*).
On the rear cabin controls of the 3-zone deluxe automatic air conditioner* -A-, the left and right rotary controls are used to adjust the temperature and the blower speed respectively.
OFF Switching the air conditioner on/off
The OFF button is used to switch the air conditioner on and off. The air conditioner will also switch on if you press the rotary control. The OFF button in the rear cabin just switches the rear air conditioning on/off. When the air conditioner is switched off, the supply of air from outside the car is cut off.
A/C Switching air cooling on/off
When the air cooling is switched off, the air is neither cooled nor dehumidified. The windows may mist up as a result. The air cooling is switched off automatically at low outside temperatures (below zero).
Switching air recirculation on/off
In air recirculation mode, the air from the interior of the vehicle is filtered and recirculated. This setting prevents fumes etc. from entering the interior. We recommend switching on the air recirculation mode when driving through a tunnel or in traffic queues WARNING!.
The air recirculation mode is switched off when the AUTO or button is pressed.
AUTO Switching automatic mode on
The automatic mode maintains a constant temperature inside the vehicle. Air temperature, output and distribution are regulated automatically.
Selecting the temperature
The temperature can be adjusted between +16 °C (+60 °F) and +28 °C (+84 °F). Outside this range, LO or HI will appear on the air conditioner display. In the two extreme settings the air conditioner operates continuously with maximum cooling or heating output, and the temperature is not regulated automatically.
Adjusting the blower speed
You can adjust the volume of air delivery manually to suit your individual requirements. Press the AUTO button for automatic blower regulation.
Adjusting the air distribution
You can direct the flow of air manually to selected outlets. Press the AUTO button for automatic air distribution.
/ * Adjusting the seat heating /ventilation*
When you press the button, the seat heating/ventilation is switched on at level 3 (the highest level). The LEDs indicate the temperature level. To reduce the temperature, press the button again. To switch off the seat heating/ventilation, press the button repeatedly until all the LEDs have gone out.
The seat heating/ventilation automatically switches from level 3 to level 2 after 10 minutes.
Switching the defroster on/off
The windscreen and side windows are defrosted or demisted as quickly as possible. The air output is increased to maximum and most of the air comes out of the outlets below the windscreen. The air recirculation mode is deactivated. The temperature should be set to 22 °C or higher. The temperature is regulated automatically.
The defroster is switched off when the AUTO button is pressed.
Switching the rear window heating on/off
The rear window heating operates only when the engine is running, and switches off automatically after about 10 to 20 minutes, depending on the outside temperature.
To switch on the rear window heating permanently, press and hold the button for at least 3 seconds. It will then remain on until the ignition is switched off.
SYNC Synchronisation*
When synchronisation is activated, the settings for the driver's side (with the exception of seat heating/ventilation*) are applied to the front passenger's side. On the 3-zone/4-zone deluxe automatic air conditioner*, the rear cabin is also synchronised. The synchronisation is deactivated as soon as any adjustments are made on the front passenger's side or in the rear cabin*.
If you press and hold one of the rotary controls, the settings will be synchronised on the other side of the same row (i.e. front or rear). For example, if you press and hold the rotary control on the front passenger's side, the settings on the driver's side are matched to the settings on the passenger's side.
Air outlets
The thumbwheels can be used to open and close the air outlets in the centre and on either side of the dashboard and rear centre console and the outlets in the door pillars. The lever in the centre of the outlets can be used to adjust the direction of air flow.
Residual heat
Press and hold the button when the ignition is switched off to activate the "residual heat" function. The system will then heat the interior using the remaining heat in the engine coolant. The residual heat function will be switched off after about 30 minutes.
WARNING!
  • For reasons of safety you should not leave the air recirculation switched on for too long. This mode prevents fresh air from entering the vehicle, so the windows can mist over if the air cooling is switched off. Bad visibility can cause an accident.
  • People with limited capacity to feel pain or sense temperature could burn themselves when using the seat heating. These people must not use the seat heating - risk of injury!
Caution!
To avoid damaging the heating elements of the seat heating, please do not kneel on the seat or apply sharp pressure at a single point.

All images, logos and text are property of © Audi. This site has no relationship with the company Volkswagen - Audi Spain nor any of its affiliates worldwide. For more information.