Applies to vehicles: with xenon headlights
The description for removing the headlight refers to the right headlight; the procedure for the left headlight is similar.
Switch off the ignition and the lights.
Open the bonnet.
Take the screwdriver and the Torx bit out of the vehicle tool kit Link.
Insert the Torx bit in the screwdriver handle.
Take off the trim panel. Detach it at the front first -arrows- Fig. 1 by pulling the front of the trim panel upwards. You can now detach the trim panel towards the front.
To detach the headlight, remove screw -A- Fig. 2 completely. Slacken screws -B- and -C- about five turns anti-clockwise.
Carefully pull the headlight slightly forwards.
The electrical connector leading to the vehicle is located on the back of the headlight. Press the catch on the electrical connector towards the rear and unplug the connector.
Detach the vent hose on the right side of the headlight.
Carefully pull out the headlight towards the front.
Caution!
Take particular care not to damage or scratch the adjacent parts of the body when removing or installing the headlights.
All images, logos and text are property of © Audi. This site has no relationship with the company Volkswagen - Audi Spain nor any of its affiliates worldwide. For more information.