Time and date of the Audi Q3

Audi RS Q3 Controls Instruments and warning/indicator lamps Instruments

: Fig. 1 Left side of the instrument cluster: SET button

: Fig. 2 Overview of instrument cluster

Depending on the equipment fitted, you can select a quartz clock, a radio-controlled clock^*

or a GPS-controlled clock^*. You can also set the time via the infotainment^* system. Please refer to the infotainment Operating Manual for more details.

Setting the quartz clock

Press and hold the SET button until the hour display starts to flash.

Press the 0.0 button -8- Fig. 2 repeatedly until the display shows the correct number of hours.

To set the minutes, press the SET button. The minutes display will flash.

Press the 0.0 button repeatedly until the display shows the correct number of minutes.

Then set the date in the same way.

Press the SET button to confirm the setting.

Note

The time will be displayed for about 30 seconds after you switch off the ignition or open the driver's door.
While the ignition is switched off, you can call up the time, date^*, temperature and mileage recorder briefly using the SET button.

Instruments