Audi RS Q3   Controls   Seats and storage  Luggage compartment
Inside of boot lid: Cover hooked into place
Fig. 1 Inside of boot lid: Cover hooked into place
Luggage compartment: Cover
Fig. 2 Luggage compartment: Cover
If any items of luggage do not fit under the luggage compartment covers when loading the car, take out the covers -3- and -4- WARNING!.
Removing
To remove the cover from the boot lid -3-, pull the fasteners -1- off the studs Fig. 1. You can now pull the cover out of the retainers -2- in the direction of the arrows.
To remove the cover in the luggage compartment -4-, pull it towards the rear Fig. 2.
Installing
To secure the cover -3- on the inside of the boot lid, slide it into the retainers -2-.
Press the fasteners -1- onto the studs WARNING!.
To secure the cover -4- in the luggage compartment, engage it in the side trim on both sides. You can now push the cover forwards until it engages.
WARNING!
  • Make sure that both luggage compartment covers are securely engaged after loading or unloading the vehicle.
  • The luggage compartment cover must always be fixed properly – risk of accident!
  • The luggage compartment cover should not be used as a storage shelf. Items placed on this cover could cause injury in an accident or if the brakes are applied suddenly.

All images, logos and text are property of © Audi. This site has no relationship with the company Volkswagen - Audi Spain nor any of its affiliates worldwide. For more information.