Audi RS Q3   Self-help   Self-help  Tow-starting / towing away
Front of vehicle: Removing the cover
Fig. 1 Front of vehicle: Removing the cover
Front of vehicle: Fitting the towline anchorage
Fig. 2 Front of vehicle: Fitting the towline anchorage
The front towline anchorage is only mounted if the vehicle has to be towed.
The screw connection for the towline anchorage is located behind a cover on the right side of the front bumper.
Take the towline anchorage out of the vehicle tool kit Link.
Carefully remove the cover by pulling in the direction indicated Fig. 1.
Screw the towline anchorage securely into the screw connection as far as it will go Fig. 2 and tighten it with the box spanner.
Put the towline anchorage back in the tool kit after use.
When refitting the cover, first insert the lugs on the cover into their mountings in the area of the radiator grille. Then insert the opposite side of the cover and press it firmly into the mountings Fig. 1.
WARNING!
If the towline anchorage is not screwed in as far as the stop, there is a risk of the screw connection shearing off during towing - risk of accident!

All images, logos and text are property of © Audi. This site has no relationship with the company Volkswagen - Audi Spain nor any of its affiliates worldwide. For more information.