- Fig. 1 CD changer
Applies to vehicles: with CD changer
Do not use any force when inserting a CD into the drive. The CD will be drawn into the slot automatically.
Loading a CD
Press the LOAD button -3- Fig. 1. When the CD changer is ready for loading, the red diodes in the CD slot -2- will flash.
Insert the CD (text facing upwards) into the CD slot -2-, holding it straight. The CD will automatically be loaded into the next available position in the CD changer. The diode -4- in the corresponding button will light up.
Loading all CDs
Press and hold the LOAD button -3- for more than 2 seconds.
Wait until the red diodes in the CD slot -2- flash.
Insert all six CDs (text facing upwards) one at a time into the CD slot -2-, holding them straight.
Loading a CD in a specific empty position
Press the LOAD button -3-. The diodes -4- in the buttons for any empty positions will begin flashing.
Press one of the flashing buttons -4-.
Wait until the diodes in the CD slot -2- flash.
Insert the CD (text facing upwards) into the CD slot -2-, holding it straight.
Loading a CD in a specific occupied position
Press the LOAD button -3-. The diodes -4- in the buttons will light up indicating which positions are already loaded with a CD.
Press one of the illuminated buttons -4-. The CD at that position will then be ejected.
Remove the CD from the slot -2-.
Insert the CD that you wish to load (text facing upwards) into the slot -2-, holding it straight.
If you press the LOAD button -3- again while loading all CDs, the loading process will be stopped.