- Fig. 1 Bulb with connector: Lug on base of bulb is highlighted
- Fig. 2 Fitting bulb for main beam headlights
- Fig. 3 Detail of engine compartment: Cover
Applies to vehicles: with halogen main beam headlights
When installing the bulb, the lug on the base of the bulb must fit into the appropriate mounting on the bulb housing.
Insert the new bulb into the plastic connector and press the metal base of the bulb into the connector as far as it will go WARNING!.
Insert the bulb into the headlight housing.
Insert the bulb into the bulb housing, first fitting it at the bottom Fig. 2 in pos. -A-.
Make sure that the lug -B- is centred and points upwards. It must fit into the guide as shown in the illustration.
Lift the plastic connector in the direction of the arrow Fig. 2 until the bulb engages in the mounting. Should it not engage immediately, please correct the position of the bulb.
Secure the cover Fig. 3.
Check whether the new bulb is working.
Have the headlight settings checked as soon as possible.