|
Applies to: vehicles with speed limiter
Switching off temporarily
Push the lever towards -2- (click stop not engaged) Fig. ►. The instrument cluster display will indicate the stored cut-off speed, and the indicator lamp 
will light up.
will light up.Switching off completely
Push the lever to position -2- (click stop engaged), or
Switch off the ignition.
The cut-off speed setting will remain stored after the system is temporarily deactivated. To resume the programmed cut-off speed, pull the lever to position -1-. The vehicle speed is limited to the stored cut-off setting as soon as your current driving speed drops below the stored cut-off speed.
The stored cut-off speed will be deleted once the ignition is switched off.
Speed limiter: currently unavailable. See owner s manualThe speed limiter has been automatically deactivated because the system has detected a fault which could impair its function. Try switching on the speed limiter again later.
WARNING
The speed limiter may be deactivated if a fault occurs in the brake system (e.g. if the brakes overheat) while the speed limiter is activated.
Note
If a system fault requires the speed limiter to switch off automatically, for safety reasons it does not switch off completely until the driver releases the accelerator pedal once or deactivates the system manually.