|
Applies to: vehicles with xenon headlights
- Fig. 352 Headlight: Plastic connector for all-weather light
- Fig. 353 Headlight unit: Installing bulb for all-weather light
Removing
Press the plastic connector upwards Fig. 352►.
Pull the plastic connector together with the bulb out of the headlight housing.
Disconnect the plastic connector from the base of the bulb.
Installing
Push the new bulb into the plastic connector so that it is securely seated ►.
Insert the bulb into the headlight housing.
First fit the plastic connector with the new bulb into the bottom of the headlight housing Fig. 353►. Make sure the tab -A- points vertically upwards.
Then press the plastic connector into the headlight housing in the direction indicated by the arrow until it is seated securely.
Fit the cover back on.
Check whether the new bulb is working.