|
Applies to vehicles: with SIM card reader
-
- Fig. 136 Inserting the SIM card (mini SIM card, actual size)
Requirements
The vehicle must be stationary, the ignition must be switched on and the Telephone menu must have been called up.
Using a separate SIM card
Insert your mini SIM card (printed side facing up, contact surface facing down) into the slot of the card reader
Fig. 136►. The missing corner of the SIM card should be at the front left. Then push the SIM card into the slot until you feel it engage.
If requested, enter the PIN code for your SIM card in the MMI.
Select and confirm OK.
To allow the MMI to connect automatically in the future, select and confirm Yes.
Select and confirm either Telephone installed in vehicle (SIM card) or Personal mobile phone (Bluetooth)
link►.
Confirm the message shown by selecting Accept this time, Always accept or Decline, depending on whether or not you wish to allow a data connection for Audi connect services to be established.
After connecting successfully
After connecting successfully, one or two symbols (depending on the connection type) will be displayed in the status line of the MMI display to indicate the signal strength -4-/-14-
Fig. ►.
You can specify whether you wish to make calls using the SIM card in the SIM card reader or your mobile phone via MENU > Settings > left control button > MMI settings > Connection manager
link►. This can also be done retrospectively.
In addition, the contacts on the mobile phone are automatically loaded into the directory of the MMI. This may take several minutes, depending on how many contacts are stored on the mobile phone.
Removing a SIM card
Briefly press the SIM card. The card will then eject from the slot. Remove the SIM card.
Note
If your mobile phone does not support the SIM Access Profile (e.g. iPhone), you can also use the contacts from your mobile phone by connecting the mobile phone to the system via the Directory/contacts profile
link►.