|
The rear towline anchorage should only be mounted if you wish to tow another vehicle.
-
- Fig. 251 Rear bumper: Cover cap
-
- Fig. 252 Rear bumper: Fitting the towline anchorage*
There is a screw connection for the towline anchorage on the right of the rear bumper.
Take the towline anchorage out of the vehicle s tool kit
link►.
To remove the cover cap from the bumper, press it in at the top -arrow- and pull it out at the bottom
Fig. 251►.
Screw the towline anchorage into the screw connection as far as it will go
Fig. 252► and tighten it with the box spanner.
Put the towline anchorage back in the tool kit after use.
WARNING
If the towline anchorage is not screwed in as far as the stop, there is a risk of the screw connection shearing off during towing - risk of accident!