Applies to vehicles: with car telephone kit
Important: Available mobile phones must be shown on the MMI display Link, and the vehicle must be stationary.
Turn the rotary pushbutton to select a mobile phone and press the rotary pushbutton.
To bond the mobile phone with SIM Access Profile, turn the rotary pushbutton to Car phone and press the rotary pushbutton. A 16-digit PIN code Fig. 1 will appear on the MMI display.
To enter the 16-digit PIN code shown in the display, select Yes Fig. 1. Enter this PIN code on the mobile phone. You will be given about 30 seconds to complete the entry, or
To enter any 16-digit PIN code, select No. Enter any 16-digit PIN code via the speller Link. Then also enter this 16-digit PIN code on the mobile phone. You will be given about 30 seconds to complete the entry.
Confirm the bonding process on the mobile phone when prompted to do so. The Bluetooth symbol -1- Fig. 2 will appear in the status line of the MMI display when the mobile phone has been bonded successfully.
Enter the PIN code for your SIM card Link.
If your mobile phone supports this function, a 6-digit PIN code will appear instead of a random 16-digit PIN code both on the display of the MMI system and on the mobile phone. Confirm this PIN code on the mobile phone and in the MMI system to bond the mobile phone to the MMI system.
After the mobile phone has been connected or the SIM card has been inserted, the contacts are automatically loaded into the directory of the MMI. It may take several minutes to load the entries, depending on how many contacts are stored on the mobile phone. For more information about the directory, please refer to Link.
You can save the PIN code for your SIM card for the automatic PIN recognition function only after the mobile phone has been bonded to the car telephone kit. To do so, confirm the prompt on the MMI display with Yes or change the settings in the Telephone menu Link after entering the SIM PIN code for the first time.
If your mobile phone does not support the SIM Access Profile, you can insert the SIM card into the SIM card reader
Link or into the handset* Link. When the SIM card is inserted, you can also use the contacts from your mobile phone by bonding the mobile phone to the system via the Directory profile Link.
Note
- You have to enter the 16-digit PIN code once only. Any Bluetooth devices that have already been bonded to the MMI system once are connected automatically when they are within range. Please pay attention to any connection queries on your mobile phone.
- You can delete stored Bluetooth devices using the function Delete external Bluetooth devices Link.
- For up-to-date information on mobile phones with the SIM Access Profile, please see the Internet (e.g. www.audi.com/bluetooth) or contact an Audi dealer.