|
Please observe the important safety warnings on
link►.
Preparations
Attach the tow-rope or the tow-bar only to the towing anchorages provided for this purpose
link►,
link►.
Please ensure that the tow-rope is not twisted as it could otherwise become unscrewed from the towline anchorage while the vehicle is being towed.
The hazard warning lights of both vehicles must normally be switched on
link►. However, observe any regulations to the contrary.
Towing vehicle (front)
Ensure that the tow-rope is taut before you drive off.
Engage the clutch very gently when starting to move (manual gearbox) and press the accelerator slowly.
Avoid unnecessary braking and manoeuvres.
Vehicle being towed (rear)
Ensure that the ignition is switched on, the steering wheel is not locked, and that you can operate the turn signals, horn or windscreen wipers if necessary
►.
The brake servo only works when the engine is running. The power steering only works when the ignition is on and the vehicle is moving
1). Otherwise you will need to press the brake pedal significantly harder and apply more force to move the steering wheel.
Please ensure that the steering wheel is unlocked and that it moves freely.
Release the parking brake
link►.
Manual gearbox: Put the gear lever in neutral.
Automatic gearbox: Move the selector lever to position N.
Ensure that the tow-rope remains taut at all times when towing.